Olsa’s Olsamix

Olsamix Vacuum mixer homogenizer’s are used for cosmetic and pharmaceutical batch production such as: ointments, creams, suspensions, dispersions, gels and make-up with a working schedule that includes ingredient loading, mixing and blending with heating and cooling stages and necessary de-aeration of the mix depending on the pre-set operating standards.

Its mixing system consists of three agitators:

  • An anchor-type outer agitator: enabling a bottom-up recirculation
  • A blade-type inner agitator: enabling a top-down recirculation
  • A bottom mounted homogenizer enhancing the shearing and mixing effect as well as giving stability to the emulsion
Product Features
  • The anchor-type agitator is equipped with Teflon scrapers whose function is to transfer the product from the inner surface of the mixer towards the inside in a way that accelerates the mass heating or cooling that occurs through the heating-cooling circuit placed in the mixer’s jacket
  • The anchor is also equipped with internal elements creating tangent flow lines in comparison to the rotating motion and giving benefits to the center transfer
  • The Olsamix is equipped with an internal CIP/SIP system engineered according to GAMP standards. A full set of automatic and semi-automatic receipts are available in order to satisfy most stringent client procedures
  • The Olsamix is available in a full range from 5 liter laboratory units to 30.000 liter large industrial equipment
  • Olsamix control systems are developed in-house in compliance with 21 CFR part 11. Operations can be automatic/semi-automatic and controlled by PLC and SCADA systems

For more information please call +44 (0)1293 824 400 or contact us

Recent Posts

Preparing for Brexit

We pride ourselves on supporting our customers especially through this turbulent time. We are developing a plan to limit the impact of Brexit so you can be assured our support will not be affected. 


We are Stockpiling service kits in Ireland for all our SLA customers and increasing our critical spares held within Ireland, criticality based around usage levels and risks.


We are allowing for some delays due to border entry points within our planning & logistics control.


As we aim to service equipment predominantly from our Irish team of Operations Engineers, Brexit should not interrupt service levels. Our principal suppliers are from Italy in the EU so any additional support labour is also not a concern.


All our Irish customers payments will be processed via our Euro bank account so will not be affected by exchange rate risks.